4. Spider Stake Assembly

Spider Assembly

The assembly procedures for the USA Spider Stake & USA Window Clip are very similar.

  1. Begin by placing the substrate on a flat surface holding it down with one hand. Lay the Spider-Stake on the same flat surface as shown and insert the spikes into the flutes, making sure to center the stake and sign.
  2. Next, pick up the assembly and firmly tap the top edge of the substrate on a flat surface using the palm of your hand on the torsion bar for a backstop to finish pushing the spikes the rest of the way in. The tapping action evenly distributes the pressure necessary to fully seat the spikes without requiring excessive force.
Back to blog